Jqueen Orbita Single Watch Winder Gold
Description & Details
Metal & Material
Jqueen Orbita Single Watch Winder Gold,Magnetization resistant design supports all mechanical watches,silent operation and low consumption, does not disturb, sound as low as 10 decibels,Professional movement, built-in strong power
- Height: 18cm
- Length: 12cm
- Width: 12cm
- Glass Material: Acrylic
- Motor type: Japanese
- Power Supply: Adapter
- Winding direction: CCW, CW, CW+CCW
- Storage For: 1 watch(es)
- Material: Metal
30 Days Returns
Track the progress of your order anytime
100% secure shopping
Get extra 5% off your order
Reveal discount by subscribing to our Messenger list:
Fill in the email sending verification code
How to find your ring size
Use the dropdown menus below to help find your circumference or diameter measurement. Next, use the chart to see which ring size corresponds to your measurement and find your perfect size.
How to Measure Your Diameter
- Diameter is the measurement across the inner width of the ring
- A ring that fits you
Find a ring that fits.
Lay the ring on top of a ruler, and measure the widest area inside the ring from the inner edge to the inner edge. Round off to the closest whole millimeter.
How to Measure Your Circumference
- Circumference is the measurement around the base of the finger
- 5mm wide strip of pager
- Pencil of fine tip pen
Cut a long strip of paper that is 5.0 mm wide.
Wrap the strip of paper around the base of the desired finger. For the most accurate result, pull the paper as tightly as possible.
* Don’t worry! The correct ring size is determined on the basis of a tight measurement; the ring itself won’t fit that tightly.
Ensure that the paper is evenly overlapped and pulled tight, and mark where the strip of paper meets itself.
Measure the length of the strip of paper in millimeters. Round off to the closest whole millimeter.
lnternational ring sizing chart
|Diametrt(mm)||USA & CA||EUR||UK & AU||SG & JP||HK||CH|
Magnetization resistant design supports all mechanical watches
silent operation and low consumption, does not disturb, sound as low as 10 decibels
Professional movement, built-in strong power
Low power operation is more energy efficient and powerful
The separated design is more convenient to take:
When the top cover is opened, the shaker stops running;
When the top cover is closed, the shaker runs automatically.
No need to open the control switch again, easy to take the watch daily
Mirror metal gloss material and glass is HD transparent,not fragile.
The plug-in design lasts 24 hours
Rear power supply
The power plug and switch are set at the back of the table box, which is convenient and beautiful, and easy to charge
New upgrade, independent speed adjustment
Adjustable speed for more mechanical watches. For the market there are still a small number of watches because the speed is not enough to cause slow or stop, the function of independent speed adjustment is added to satisfy the majority of users
Four-gear mode, easy to operate by one key
The SWITCH FUNCTION OF THE FOURTH GEAR is: THE first gear SHUTS down, THE SECOND gear turns clockwise, the THIRD gear turns COUNTERclockwise, and the FOURTH gear turns clockwise and then COUNTERclockwise
Schedule of work
2. Turn clockwise for 2 minutes and stop for 8 minutes,loop
3. Turn counterclockwise for 2 minutes and stop for 8 minutes,loop
4. Turn clockwise for 1 minute, then turn counterclockwise for 1 minute, and stop for 8 minutes,loop
- Glass Material/Acrylic
- LCD Display/No
- LED Lightning/No
- Motor type/Japanese
- Overwind Protection/Yes
- Power Supply/Adapter
- Sleep Mode/No
- Winding direction/CCW, CW, CW+CCW
- Storage For/1 watch(es)
- Jqueen Orbita Single Watch Winder Gold
DeleteNo more than 6 pictures. each picture size is less than 4M. supports GIF, JPG, PNG and BMP formats.
There is no question yet.
- Ask Question